Aluma Storm 477: the price of a boat, buy an aluminum boat from the factory, own production in England 2024

Maximum versatility and seaworthiness, and in the last paragraph Aluma Storm 477 surpasses all analogues.

Color spectrum
Aluma Storm 477

Scroll

Photogallery

Exterior Interior ALUMA STORM PORSHE

SPECIFICATIONS

Case Length

4653

Length overall

5158

Case Width

2238

Midship-side

933

Keeled on the Transom

16°

Keeled on the midships

25°

Case weight

500 kg.

Fuel tank capacity

100 l.

Metal Thickness, Bottom / Side

3/3

Maximum engine power

130 l/s

Basic configuration

All-Welded Aluminum Case (AMG5M)

The made foam blocks of unsinkability with rigid porous Basf polyurethane (Germany)

Decorative lining under the console

Interior decoration with Syntec marine carpet (USA)

3 additional bases for a rack of seats

Accessories (hinges, locks) in AISI 316 stainless steel

2 sockets of 12 volts (bow, control post)

Electric pump for pumping water

Mooring ducks 4 pcs. (stainless steel)

Fuel filter separator

Lockers in the stern - 2 pcs. (190 liters)

Chipboards platform fish - 2 pcs. (200 liters)

Dry lockers in the bow 2 pcs. (213 liters)

Bow deck lighting

Bilge pump circuit breaker

Fuel gauge

Steering system (steering wheel, gearbox, cable)

Stationary fuel tank per 100 liters

2 swivel chairs with a stand

Finishing control panels with decorative inserts

Tempered glass in an aluminum frame

Heavy Duty Power Pack (Aluma-Pro)

Painting the hull with ship paint

Aluminum consoles with a glove compartment in the passenger console

Covering the deck with premium marine vinyl MariDeck (USA)

Built-in switch panel - 10 pcs.

Stainless steel fuel filler neck

Electrical wiring under 36 volts

Mass switch

Navigation lights (navigation, parking)

Cockpit lighting

2 spinning lockers (max. length 2700 mm, max. Length 2450 mm)

Anchor locker in the bow - 1 pc. (30 liters)

POWERFUL POWER KIT

We put SAFETY and RELIABILITY at the forefront in the design of our boats. Therefore, we paid special attention to the hull of our boat. Our boats have the MOST POWERFUL AND RELIABLE power set among analogues.

Powerful — because it is designed with a large margin of safety.

Reliable — because we make a power set of the same material as the body. Everything is cut out of the same marine aluminum and welded into a single structure.

The power set of our boat consists of six stringers and seven frames with a maximum spacing size of 50 cm. The height of the frames and stringers is calculated with a considerable margin, based on extremely extreme operating conditions, and the special design of our transom allows you to install motors up to 130 hp.

Such a number of stringers and frames, their size and location guarantee the reliability of the body with a significant margin.

Typically, maximum shock loads occur in the second quarter of the boat, so the stringer in our boats reaches the first frame to give maximum reinforcement in this part of the hull!

POWERFUL POWER KIT

Megafunctionality

Video

MULTI-SITUATED CONSOLE FROM ALUMINUM

Capacious aluminum consoles — this is the ability to install almost any instrument, accessories and echo sounders. Special marine «leather» and decorative inserts are used in the decoration of consoles. The steering wheel of the Isotta company is installed on the driver panel.

The design of our consoles will not leave anyone indifferent!

Video

TEMPERED GLASS COMPLEX FORM

Toughened glass of complex shape — this is the durability and the ability to install a wiper. Unlike plexiglass glazing, our glasses do not cloud with time and do not distort the objects that you look through it.

Pay attention to the height and tilt of the glass — in our boat you will be comfortable in any weather!

Video

RUNNING TENT INTEGRATED IN FISH PLATFORM

The frame and roof of the awning can be installed in a few seconds. The height of our awning from the cockpit floor to the roof is 180 cm. The awning itself is made of the highest quality materials, arches and all stainless steel fittings. Our tent is a transformer.

At your request, you can install either a full awning, or a roof, or a roof and side parts.

Video

POSSIBILITY OF ORGANIZING BEDS FOR 2 AND MORE PERSONS

Accessories for organizing a berth can be removed to standard places in lockers and installed in a matter of minutes. The size of the berth in our boat makes it possible to comfortably accommodate two large people or a married couple with a child.

The berth can be used as a platform for sunbathing.

Video

POSSIBILITY OF INSTALLING A TABLE IN THE COCKPIT

The size, and most importantly — the width of our boat, allows you to install a collapsible table in the cockpit. The table top and table support can be cleaned in a locker and installed in a few seconds. From our table can comfortably accommodate from 2 to 4 people. The table top and table support can be removed both in the locker under the fish platform and in the locker in the bow of the boat.

WEAR-RESISTANT MARINE MATERIALS

We use only premium materials from leading companies in the world (USA, Europe, Russia) in the production of our boats. Buying our boats, you can be sure that our products will last you for many, many years.

Unsinkability

There are several solutions for the manufacture of blocks of buoyancy in boats. The overwhelming majority of foreign manufacturers have been using two-component foam for many years.

Durability. Foam is not subject to destruction from contact with gasoline or the environment.
Foam with a closed cell practically does not absorb water.
Foam gives the body even greater rigidity and serves as an excellent sound insulation.

We use only two-component foam with a closed cell with a density of 41 kg per cubic meter.

To get the right final product, you need to use only the best equipment, since in the process of mixing the two components of the foam it is necessary to very accurately observe both the temperature regime and the consistency of the components.

In our case, the Graco apparatus is responsible for this.

the unsinkable conducted a test